- Year: 1988
- Make: Mazda
- Model: 929
- Trims Available: 1
- Made In: JAPAN
- Body & Doors: SEDAN 4-DR
- Engine: 3.0L V6 SOHC 18V
- Transmission: 4-Speed Automatic | 5-Speed Manual
- Driveline: FWD
- Seating: 5
- MSRP: $$19,850 USD
- MPG: 18 miles/gallon/24 miles/gallon
- Tires: 195/65R15
- Tank Size: 18.50 gallon
1988 Mazda 929
1988 Mazda 929 has an enjoyable SEDAN 4-DR body style. It is manufactured in Japan. The car has 1 variation available for its customers. 1988 Mazda 929 is seating 5 people. The engine type is 3.0L V6 SOHC 18V. The car has a large tank size capacity of 18.50 gallon. 1988 Mazda 929 uses 18 miles/gallon of gasoline in the city. On highways, the usage of gasoline comes to only 24 miles/gallon. The wheel of the vehicle's axle are FWD driveline. The tires are 195/65R15 which provide comfort and little to non friction. The overall length of the model is 193.10 in. The height of the vehicle is 54.50 in. which is kept as low as possible to keep the vehicle's center of gravity as close to the ground as possible. The Manufacturers Suggested Retail Price is $19,850 USD. 1988 Mazda 929 has had 2 recalls in the past 32 years.
Photos & Videos
Safety & Recalls
Recall 18296 started on 05/24/1995 by ODI effecting 360,433 units.
Summary: THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
Consequence: THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.
Remedy: OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN.
Notes: SYSTEM: INTERIOR; SEAT BELTS; BELT BUCKLES.VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH SAFETY BELTS MADE BY TAKATA CORPORATION.NOTE: IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED UPONSERVICE DATE AND THE REMEDY IS NOT PROVIDED FREE OF CHARGE WITHIN A REASONABLE TIME, PLEASE CONTACT MAZDA AT 1-800-222-5500. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.
Recall 19302 started on 10/29/1993 by ODI effecting 244,000 units.
Summary: RESIN MOLDED FRONT HANDLES FAIL AT THE DOOR LATCH ACTUATING ROD ATTACHMENT, FREEING THE ROD TO FALL INSIDE THE DOOR FRAME. SUBSEQUENT LOWERING OF THE ASSOCIATED WINDOW MAY FORCE THE ACTUATING ROD DOWNWARD AND RELEASE THE DOOR LATCH.
Consequence: INADVERTENT ACTUATION OF THE DOOR LATCH CAUSES THE DOORTO OPEN UNEXPECTEDLY WHICH COULD RESULT IN AN OCCUPANT FALLING OUT OF THEVEHICLE.
Remedy: DEALERS WILL REPLACE THE DOOR HANDLE/LATCH ASSEMBLY.
Notes: SYSTEM: STRUCTURE; DOOR ASSEMBLY; HANDLE; OUTER.VEHICLE DESCRIPTION: PASSENGER VEHICLES.